How to remove the door trim for a Ford Focus 3?

To disassemble the front door of a Ford Focus 3 car, you will need a plastic thin plate and a set with bargaining nozzles. Removing the trim on the back door by analogy.

The very process of removing a door card will be as follows:

first remove the corner

then pick up and remove the plastic panel from the door handle of our Ford Focus 3

there are two screws under it, unscrew them

then remove the plug from the side of the door and unscrew another screw there

a screw is also hidden under the reflector, therefore it must be removed

The next door trim fixing screw is located under the plug near the door opener handle. To remove the plug, you need to press with your finger in the indicated place (red dot), pick up and unscrew the bolt under it.

then door trim Ford Focus III you can pull it off, it is now attached only to clips (carefully so as not to break them)!

And this is how the process of removing and trimming the rear door of a Ford Focus 3 actually looks like: