Best card diagnostic solutions
  • Fast Dispatch And
    Delivery
  • Highest Quality
    Standard & Safety
  • 100% Satisfaction
    Guaranteed
  • Best Value for
    your money
  • Great Customer
    Service
Sale!

Key programmer for Toyota and Lexus

Available:In stock

Price:5,300.00 4,900.00

Qty

Quick Overview:

Toyota key programmer using for add key, learn new key if all keys lost and for emergency startkey

Description

Key programmer for Toyota-Lexus-Scion vehicles with Smart Access Systems by OBD Support 2015+

Device has two options:

  1. Master key emulation: Program slave keys, smart key and Transponder Emulator (ZN039) to the vehicle.
  2. Emergency start: Device is connected with a transponder Emulator to start the vehicle, using the built in emergency start functionality so that it can be taken to the nearest service point.
    The new version unlocks/deactivates alarm.

Direct key programming, no need to reset master keys, available for vehicles based of DST40 and DST80 vehicles with smart keys
NO MORE REMOVING OR OPENING THE ECU.
Supported ECUs (1ND-TV-EDC15 1.4 D4D, 4ZZ-FE 1.4, 1KR-FE 1.0, 1NR-FE 1.33, 1SZ-FE 1.0)
Covered Toyota models : Corolla, Yaris, Auris, iQ, RunX 140, Echo, Verso S, Urban Cruiser
Tool has been tested on European vehicles only, device is currently testing on vehicles from other regions of the world.

How the Toyota key programmer work:

Before beginning any of the procedures it is important to wake the car up. This is done by pressing the start button a few
times and turning the headlights on and off.

Mode 1: Emergency start
The switches have to be as follows: 1.ON 2.OFF 3.ON 4.OFF 5.ON 6.OFF 7.ON 8.OFF
The device needs to be plugged in and you need to look at the LED. If it is flashing RED, you need to press the start
button with the transponder emulator.
If it is solid RED, you need to touch the start button with the transponder emulator.

Mode 2: Key programming
Switch 1 is ALWAYS ON. Then depending on the number of keys you want to program, slide the corresponding switch
to the ON position (for example for 3 keys, SWITCH 3 should be set to ON).
The device needs to be plugged in and you need to look at the LED. If it is flashing RED, you need to press the start
button with the transponder emulator.
If it is solid RED, you need to touch the start button with the transponder emulator.
If the LED is solid GREEN, you need to touch the new key that you want to program to the start button so that it can be
programmed to the car.
Usually the car makes a sound.

Looking else for our TLS key programmer

Reviews

There are no reviews yet.

Be the first to review “Key programmer for Toyota and Lexus”

Your email address will not be published. Required fields are marked *

From The Blog
Read All Our Blog

Want to Stay Informed?

Subscribe to get all the Latest News, Updates and Offers.

© Copyright 2018 Carscanners. All rights reserved.
error

Enjoy this blog? Please spread the word :)