Dimetix DLS-CH 15 – for precise measuring in extreme situations
The DLS-CH distance measuring device measures absolute distances up to 150 m without contact and with an accuracy of 1.5 mm. It represents a cost-effective solution even at extreme ambient temperatures as low as -40° C using heater.
The DLS-CH has been designed to be suitable for both heavy industrial and outdoor applications. It is built of a solid metal case and provides class IP65 environmental protection. Furthermore, various features make it flexible for multiple applications in numerous industries such as automotive, paper, metal and textile.
Made in Switzerland!
NEW, without box!
Measuring range 0.05 to 150 m
1.5 mm accuracy
Serial interface (RS-232 and RS-422)
High precision analog output (0.2%)
Two programmable digital outputs
Digital output for error signalization
D-Sub connector and screw terminal for easy connection
Solid metal case IP65
Wide temperature range: -40 … +50 °C
Range on natural target
0.05 … ~65 m
Range on reflective foil
~25 … 150 m
Accuracy @2σ typ.
Max measuring rate
Operating temperature range
-40 °C – +50 °C
Degree of Protection
24 … 30 VDC
150 x 80 x 55 mm
Analog output 0/4 … 20 mA
max. Error ±0.2% – programmed span
Digital output (programmable)
Digital Output (error display)
500624 DLS-CH 15 Distance Laser Sensor
500202 AO/DO Connection cable
Length = 3m, with 15 pin connector IP65
Cable for the connection of a DLS Distance Laser Sensor using the automatic mode.
Not recommended for use for devices with the heater.
500113 Reflective Plate 210 x 297 mm
Reflective plate 210 x 297 mm (orange)
applicable distance range DLS: from about 25m to 500m
500253 Connector 90° IP65 for 15 pin D-Sub
This connector helps to integrate the DLS into machines. It fits the back end of the DLS
perfectly and can be used to connect the necessary wires. The maximum cable diameter which might be
connected is 5mm.
500203 RS-422 Connection cable DLS/FLS
Length: 5m, with 15 pin connector IP65
500251 Cover IP65 for 15 pin D-Sub connector
If the DLS is connected by a cable using the cable gland, the 15 pin D-Sub connector is not used. This connector cover protects the unused D-Sub connector.