Welcome visitor you can Login or Create An Account.
Best card diagnostic solutions
  • Fast Dispatch And
    Delivery
  • Highest Quality
    Standard & Safety
  • 100% Satisfaction
    Guaranteed
  • Best Value for
    your money
  • Great Customer
    Service
Please follow and like us:

How to: Program keys to Harley Davidson if all keys LOST and PIN unknown

Customer lost keys from his Harley and don’t know PIN – this is not the problem!

It’s very easy with our tools.

In first you need read PIN-code from Harley Davidson ECU.

You need Simplediag interface.

And license for read PIN-code.

When PIN will found use these algorithms for learn new keys:

TSSM equipped bikes

To reset the code with a TSSM equipped bike (with button fob), you should:
1) Set your kill switch to off
2) Quickly turn the ignition switch on, off, on, off, on
3) Immediately press and let go of the left turn signal switch twice (press, let go, press, let go)
4) Press and let go of your fob button twice (press fairly hard)
5) Current PIN number will be displayed on odometer
6) Change the PIN by pressing the left signal until the desired number is reached
7) Press the fob button twice to cycle to the next number and repeat step 7
8) Press and let go the right signal and turn ignition off when 5 digit PIN is satisfactory
NOTE: Steps 2 through 4 must be completed in quick succession of each other.

Now you can have the bike armed, and disarm with the PIN (example PIN will be 25522 in the following steps):
1) Ignition switch to Accessories
2) Immediately press both turn signals at the same time (red key light on your speedometer will flash rapidly if done right)
3) Press and let go the left signal 2 times
4) Press and let go the right signal once
5) Press and let go the left signal 5 times
6) Press and let go the right signal once
7) Repeat for each of the last three numbers of the PIN (left 5 times, right once, left 2 times, right once, left 2 times, right once)
8) Red key on speedo will stop blinking if done right (security has been disarmed)
NOTE: Steps 2 through 7 must be completed in quick succession of each other.

HFSM equipped bikes
1) Have your key fob near the bike
2) Set your kill switch to off
3) Quickly turn the ignition switch on, off, on, off, on
4) Immediately press and let go of the left turn signal switch twice(press, let go, press, let go)
5) Press and let go the right signal once
6) Current PIN number will be displayed on odometer
7) Change the PIN by pressing the left signal until the desired number is reached
8) Press the right signal to cycle to the next number and repeat step 7
9) Turn ignition off when 5 digit PIN is satisfactory
NOTE: Steps 3 through 5 must be completed in quick succession of each other.

Now you can have the bike armed, and disarm with the PIN (example PIN will be 25522 in the following steps):
1) Ignition switch to on
2) Immediately press both turn signals at the same time(red key light on you speedometer will flash rapidly if done right)
3) Press and let go the left signal 2 times
4) Press and let go the right signal once
5) Press and let go the left signal 5 times
6) Press and let go the right signal once
7) Repeat for each of the last three numbers of the PIN(left 5 times, right once, left 2 times, right once, left 2 times, right once)
8) Red key on speedo will stop blinking if done right(security has been disarmed)
NOTE: Steps 2 through 7 must be completed in quick succession of each other.

Please follow and like us:

Leave a Reply

Your email address will not be published. Required fields are marked *

Want to Stay Informed?

Subscribe to get all the Latest News, Updates and Offers.

© Copyright 2018 Carscanners. All rights reserved.
Website Designed & Developed by ebaystoredesign.org

Enjoy this blog? Please spread the word :)