Changing the cabin filter Honda Pilot 2 (2012) refers to a fairly wide range of periodic vehicle maintenance procedures. It is not at all difficult to change the cabin filter with your own hands, and this photo report will show that this is really so. No tools required, unless the vacuum cleaner will be useful for cleaning the case or the filter itself.
Replacement intervals and numbers of suitable cabin filters Pilot
When to change the cabin filter – the replacement interval is every 30,000 km or every two years. In severe operating conditions, it is reasonable to reduce the frequency to 15,000 km, or at least clean the filter at this interval.
Which cabin filter to install – Genuine Honda cabin filter 80292SHJA41. Analogues: Purolator C35519, Fram CF10134, TYC 800003P, Denso 453-2026, Wix 24897, Bosch P3875 and Mann-Filter MC 1015.
Replacing the cabin filter DIY Pilot
The cabin filter Honda Pilot is located behind the glove compartment, so it will need to be removed. Everything is done simply – you need to shake everything out of the glove compartment, squeeze the walls, removing the shelf from the clips, lower the glove compartment to the floor. The cabin filter is now accessible.
There is only one obstacle left – the cabin filter cover. To remove it, you need to squeeze the clips along the edges, after which you can pull out the cabin filter tray.
After removing the filter from the tray, it should be inspected from both sides. A filter clogged with debris and dust that has changed its original color to dark gray or black should be replaced. Not very dirty filter can be cleaned and put back.
Installation of a new filter is carried out in the reverse order. The only caveat, which side to put the cabin filter. If an arrow is drawn on it, it should be facing down.
Glove box Honda Pilot 2.
Open the glove compartment and remove all things from there.
Shrink the walls of the glove compartment.
On the other hand.
Remove the glove compartment shelf from the clips and lower it down.
Cabin filter cover
Squeeze the latch on one side of the cover.
Pull the cabin filter tray towards you.
Cabin filter removed.
Remove the filter from the tray and inspect, clean or replace with a new cabin filter.
Empty filter housing.
Insert cabin filter.
The cabin filter is installed back.
Raise the shelf.
Secure the glove compartment to the clips.
On the other hand.
Throw things back.
Raise the glove compartment and complete the replacement.