fbpx
Best card diagnostic solutions
  • Fast Dispatch And
    Delivery
  • Highest Quality
    Standard & Safety
  • 100% Satisfaction
    Guaranteed
  • Best Value for
    your money
  • Great Customer
    Service
Sale!

KEY PROGRAMMER for Smart 450-451-452 models.

Available:In stock
SKU: 11 Tags: , , , , ,

Price:520.00 480.00

Qty

Quick Overview:

KEY PROGRAMMER for Smart 450-451-452 models.

Main functions – Program keys for K-line and CAN based Smart cars – models 450, 451 and 452

 

Description

KEY PROGRAMMER for Smart cars: 450-451-452 models.

Main functions – Program keys for K-line and CAN based Smart cars – models 450, 451 and 452

K-Line based cars:

SMART UM (switches):

SW1 – ON -> Kline

After the device is plugged in the OBDII port, it performs the following functions:

− Automatically establishes a diagnostic session with the SAM control unit and puts the SAM control device in a key-synchronization mode.

− At some point the yellow and green LEDs on the key-learning device will go OFF. At this point the Key LED on the dashboard should start blinking fast. You need to switch Ignition OFF at this moment.

− If your key has more than 1 buttons – press the ‘CLOSE’ button twice within 30 seconds. If the key is successfully registered, the Key led in the dashboard must go off for about 2 seconds and after that will continue blinking again.

If your key has only 1 button – press it twice within 30 seconds.

ATTENTION: You must synchronize all the keys you have, otherwise you cannot start your car with non-synchronized keys!

− After the 30 seconds have elapsed – the green and yellow LEDs on the key learning device will start blinking synchronously (for 2 seconds they will both be ON and for 2 seconds they will both be OFF). This means that the Key-Learning procedure has finished successfully.

− Now, you must confirm that all keys are synchronized by trying to start the vehicle’s engine with each one of them. If for some reason one or more of the keys are not correctly synchronized – you can repeat the procedure.

CAN based cars:

SW2 – ON -> CAN

SW5 – OFF + SW6 – OFF – 1 key

SW5 – ON + SW6 – OFF – 2 keys

SW5 – OFF + SW6 – ON – 3 keys

SW5 – ON + SW6 – ON – 4 keys

After the device is plugged into the OBDII port, it performs the following tasks:

− Automatically establishes a diagnostic session with the SAM control unit over CAN and puts the SAM control device in a key-synchronization mode.

− Within only a few seconds the yellow and green LEDs on the device will go OFF. At this moment you must switch the Ignition OFF and then ON again.

ATTENTION: You must switch the Ignition ON again within 20 seconds, otherwise the teach-in process will be aborted.

− After that if you want to learn further keys, you must exchange the key in the Ignition Switch and again wait for the yellow and green LEDs to go OFF. The ignition must be switched ON again in no more than 20 seconds, otherwise the teach-in process will be aborted.

− It is very important to carefully observe the indications, that the green and yellow lamps provide to you!
Any time when the yellow and green LEDs are OFF, you must switch the Ignition OFF!
Any time when the yellow and green LEDs are ON, you must switch the Ignition ON!

− Confirm that all keys are synchronized by trying to start the vehicle’s engine with each one of them.

Emergency start:

SW3 – ON -> Emergency

Looking else for our Renault EVO key programmer

Reviews

There are no reviews yet.

Be the first to review “KEY PROGRAMMER for Smart 450-451-452 models.”

Your email address will not be published. Required fields are marked *

From The Blog
Read All Our Blog

Want to Stay Informed?

Subscribe to get all the Latest News, Updates and Offers.

© Copyright 2018 Carscanners. All rights reserved.
error

Enjoy this blog? Please spread the word :)